Ferris IS 700 52 Briggs CXi

The IS 700 52 sits on a useful comparison line within Ferris: a 52-inch seated mower with chassis suspension, without assuming the front-wheel arrangement of an ISX model. It is worth considering when a smaller IS 600 no longer matches the desired cutting width, but the route does not call for a 60-inch deck.

Identify the current CXi configuration

Ferris's specification table pairs 5902107 with a 27 hp, 810cc Briggs & Stratton CXi engine and serviceable Hydro-Gear ZT-3200 transaxles. This is the 52-inch column; the 60-inch model has a different identifier. Do not order parts against an older IS 700 engine description without checking the actual plate.

The deck is fabricated from 10-gauge steel, with a 1.5-to-5-inch cutting range. Fuel capacity is six gallons, and the published travel maximum is 10 mph. Those figures describe equipment rather than a promise of fuel endurance or acceptable cutting speed.

Separate the axle, rear suspension and seat

Ferris documents a pivoting front axle with adjustable shocks and a rear swing-arm suspension. The listed mid-back suspension seat includes adjustable armrests. Have the dealer set up both the chassis and seating position, then compare the ride on a suitable area resembling your lawn.

The ISX 800 52 is the same-width step-up reference for a different front suspension layout and drive package. The IS 600 48 is the narrower comparison. Use the suspension guide to keep seat movement separate from wheel and axle movement.

Inspect access and the complete footprint

A removable floor pan exposes the top of the deck, while grease fittings are accessible above the spindles. Ask the technician to demonstrate routine access with the mower safely prepared. Do not treat a serviceable transmission as maintenance-free; its applicable schedule remains part of ownership.

Ferris lists 65 inches with the deflector down and 57 inches with it raised. Check access, turning space and storage using the approved configuration for each task. A 52-inch gate is not established as suitable by the nominal cut.

Our buying view: IS 700 52 is a candidate when its cutting width and adjustable chassis suit the property. The warranty summary separates the initial two unlimited-hour machine years and later four-year/500-hour limit from suspension and engine terms. Confirm eligibility for the advertised ten-year suspension coverage and obtain a complete local quote. Research checked October 14, 2026; comfort and cutting performance have not been field-tested by ZeroTurn.

Our ZT Score

7.9/10 — our research-based editorial assessment using the ZeroTurn scoring method.

• Cut quality (30%): 7.9/10. The fabricated deck and documented height range provide a useful cutting package, without proof of better finish than alternatives.
• Build & durability (25%): 7.9/10. Serviceable ZT-3200 drive and greasable spindles earn credit; long-term reliability has not been established.
• Comfort (20%): 8.2/10. Adjustable chassis suspension plus the listed suspension seat support comfort potential, subject to correct setup and a demo.
• Value (15%): 7.4/10. The 52-inch suspended package can suit a larger lawn, conditional on its quoted cost against the IS 600 and ISX 800.
• Ease of use (10%): 7.9/10. Removable floor pan and top spindle fittings aid access, while overall width and suspension setup add ownership considerations.

Provisional research-based editorial judgement of documented equipment, not a hands-on test. ZeroTurn has not measured finish, fatigue, fuel consumption or service life. Reliable model-specific owner consensus and delivered US or Canadian dealer quotes were not established. Value is conditional on the intended work, complete price and practical local support.