Gravely Pro-Turn 252 Kawasaki

The Gravely Pro-Turn 252 puts the 200-series drivetrain into a 52-inch cutting configuration. It is a candidate for commercial work where a larger deck is awkward, but the buyer wants to assess the series' drive and fuel package.

Match model 992550

Gravely's product page identifies 992550. The series specification sheet lists a 27 hp, 852 cc Kawasaki FX850V, ZT-5400 transaxles and 13 US gallons of fuel capacity.

The Pro-Turn 152 provides a same-width comparison in the preceding series. Compare the exact equipment and full job, rather than assuming that the 252's published 13 mph maximum translates directly into mowing output.

Allow room for the discharge side

The sheet lists 67.5 inches with the discharge chute and 55.5 inches without it. The smaller figure is not permission to operate without the required discharge protection. Measure the supplied mower and check the approach to gates and trailer positions.

The X-Factor 2 deck uses 7-gauge steel with quarter-inch spindle-area reinforcement. Its foot lift selects among 17 positions from 1.5 to 5.5 inches. Ask the dealer to demonstrate adjustment and routine service access.

A suspension seat with molded armrests and folding ROPS completes the documented operator package. Set up and use the restraint and rollover equipment according to the exact manual. Neither those features nor suspension makes an unsuitable slope safe.

Confirm the purchase documents

Gravely lists five years or 1,250 hours of commercial coverage, with unlimited hours during the first two years. Frame and deck-shell provisions are separate. Our warranty reading guide explains why component limits need their own entries.

Published tire descriptions differ between the series sheet and newer catalog. Confirm the fitted equipment rather than ordering from an assumed tire specification.

The 252 is most persuasive when the drivetrain and fuel capacity answer a real workload requirement within this deck width. We have not measured fuel endurance, cut quality or operating cost; a route demonstration and local service quote should complete the decision.

Our ZT Score

7.9/10 — our research-based editorial assessment using the ZeroTurn scoring method.

• Cut quality (30%): 8.1/10. Reinforced deck and 17 height positions offer setup options; no finish test performed.
• Build & durability (25%): 8.3/10. ZT-5400 and substantial deck construction support the equipment assessment, not lifespan certainty.
• Comfort (20%): 7.9/10. Suspension seating and armrests provide fit features, with actual ride untested.
• Value (15%): 7.3/10. The drive and tank package may fit intensive work, but its purchase and operating premium is unknown.
• Ease of use (10%): 7.6/10. Foot lift assists adjustment; operating width and purchase-specific details require planning.

Provisional research-based editorial assessment, not a hands-on test. Cutting results, ride quality and service life have not been measured. Model-specific owner consensus and comparable delivered US/Canadian prices were not established. Value depends on the actual configuration, property and local service support.