Bobcat ZT2000 48

The Bobcat ZT2000 48 is most useful as a carefully identified used-mower or remaining-stock comparison. Bobcat includes the series in its non-current model section, so a published specification should not be read as proof of current production or local availability.

Establish the machine behind the listing

Bobcat's service schedule index associates the 48-inch ZT2000 with serial prefix 9992002. It also lists an all-deck B7AP group. Record the complete plate and obtain the matching maintenance information before assessing a particular mower.

The archived specification page lists a 21.5 hp Kawasaki FR651V and ZT-2800 transaxles. Its published forward maximum is 7 mph. The ZT2000 42 is the smaller-deck alternative within the family.

Compare the next series at the same width

The ZT3000 48 changes to an FT651V and ZT-3100 drive. Those are concrete differences to evaluate alongside condition and price. A higher series number alone cannot establish that a particular used machine is the better purchase.

For the ZT2000, TufDeck construction specifies a 10-gauge top with 7-gauge spindle supports and skirts. Inspect the actual deck and its attachment points, rather than assuming the original steel specification means it has avoided damage.

The documented high-back spring suspension seat includes sliding adjustment. Check the mechanism, control reach and seat condition during the demonstration. No comparative ride test has been performed for this review.

Do not copy questionable table dimensions

The archived page repeats some width and weight entries across differently named deck columns and shows differing height ranges for other variants. We have not treated those entries as dependable clearance or adjustment instructions.

Ask for serial-matched dimensions and measure the supplied machine with discharge equipment and attachments. A qualified inspection is especially valuable if parts have been replaced. The used-mower checklist helps organize service records and inspection findings.

Bobcat's North American policy lists 36 months/500 hours for ZT2000, excluding the engine from that machine policy. Original purchase terms and delivery date determine what applies to an individual unit.

Consider the 48 when its footprint and verified condition fit the property. Keep unconfirmed repair costs, warranty and asking-price value open until the inspection is complete.

Our ZT Score

7.3/10 — our research-based editorial assessment using the ZeroTurn scoring method.

• Cut quality (30%): 7.4/10. Reinforced TufDeck supports the equipment assessment, but actual finish and setup require inspection.
• Build & durability (25%): 7.6/10. ZT-2800 and documented reinforcement are useful hardware; present condition is unknown.
• Comfort (20%): 7.2/10. Spring suspension seating and slide adjustment provide fit features without a verified current ride result.
• Value (15%): 6.9/10. A used middle-width mower can fit the job, but condition, repairs and asking price remain decisive.
• Ease of use (10%): 7.3/10. The cutting span can suit mixed routes, while uncertain dimensions and serial details require additional checks.

Provisional research-based editorial assessment, not a hands-on test. Cutting results, ride quality and service life have not been measured. Model-specific owner consensus and comparable delivered US/Canadian prices were not established. Value depends on the actual configuration, property and local service support.